Just a quick post to say that after talking to the registered teams, we will be bringing the start of the 2016 Championship forward a couple of hours to 12 noon on 9th July 2016.
This is for two reasons: to give us a bit more flexibility on the format, and to make sure that everyone can stay to watch/participate in the final games and still get back home at a sensible time .
Get ready for a High Noon showdown!
Finally! We started the design for our Kings from the iconic king shape that we used in our logo. Its true to say that there is no 'wrong' shape for a king, as long as it meets the rules, but we decided to use the one that was most obviously recognisable as Kubb. To me, it's a bit like the Staunton chess set: they all work, but I'm a bit of a traditionalist.
Starting with the 90mmx90mm poplar stock that we got from G&S Specialist Timber, the first step was to cut to 300mm length (plus a bit for trimming) and square them up a bit.
We had chosen a very simple collar shape, which we put on with a 25mm 90 degree router bit on a table fitted with a pretty accurate fence. Three runs with increasing depth made sure that we had no stuttering or break outs.
That, we knew, was the easy bit. I'd always had concerns about how we could cut the traditional crown shape on the top of the king, and had concluded that cutting the shape with a band saw, pretty much by eye, would be the best bet.
We fitted a fence to the band saw bed, set it to 45 degrees, and ran the cuts up to a pencil line by eye. The wood is not particularly cheap, and we had no spares, so we were a little nervous in case anything went wrong. It all worked out pretty well though, and barring a few edges that needed a last sand, it was done from start to finish in a couple of hours.
The only thing left was to sand them all off with an orbital sander, and put on a minimal 3mm radius round over on all the edges.
I was delighted with the results, I have to say. Ten kings in beautiful poplar to stand along side the kubbs and batons that we finished a couple of month ago.
You will notice that the design at the top of the page includes a laser etched logo. That is next on the to-do list :)
I got asked the question a couple of days ago: "How did you start playing Kubb?".
Swedes play Kubb at barbecues and at the beach in the way that Americans throw horseshoes or frisbees or the way that Brits play badminton. To Swedes, Kubb is just part of normal life, and in Sweden you can buy Kubb at every petrol station in the summer, to be picked up as you drive to your lakeside retreat. In your Volvo.
However, to the rest of the world (with the possible exception of Eau Claire, Wisconsin) Kubb is highly niche, and most people will have been introduced to it by a friend, or will have happened across it being played somewhere.
That latter method was how I came across the game. A couple of years ago, we were staying at a holiday villa in Talland Bay in Cornwall. I was taking the dog for a walk round the site one afternoon when I spotted a blond-haired guy playing a weird wooden skittles type game with his two young kids. I watched for a minute, and decided I'd ask about the game on the next lap of the site. By the time I got back, the (possibly Swedish) family had gone, and actually left the site permanently before I ever got a chance to ask. Carpe diem, folks.
Anyway, google was my friend, as ever, and by searching for images related to "wooden skittle type game", I quickly found the name I was looking for. A few minutes later and I had ordered a very ordinary Kubb set to be delivered to us on site, with the idea that we would learn the game during the second week of our holiday.
We played pretty much every day once we had our hands on the kit, and everywhere we went we were asked about Kubb. That is one of my clearest comments on Kubb: people are fascinated by it, and everywhere we play, before long, someone will ask what we are up to.
In fact, if you like the game and are looking for people to play, I'd genuinely suggest that you just go to the local park and start playing a game. You'll have people asking to join in before you know it.
Once we got involved in the UK Kubb Championship, my friend Glenn had some little cards made up, so that when people asked about the game, we could send them away with a pointer to the web site. They work really well.
Since then, we must have introduced another twenty or thirty people to the game directly, even without the UK Kubb connection, and most of my friends now have sets of their own. There's just something about Kubb that seems to be appealing and I am delighted to be involved in the ever accelerating spread of this fantastic game. A game that I was so lucky to stumble upon on a cliffside in Cornwall.
In the first part of this article (a few months ago now) I talked about my attempt to find a 'Championship' standard size for Kubb pieces. In this second part I'll relate the fun I had manufacturing a working Kubb set without any real skill in woodworking. Or tools. Or wood, to start with.
I'd spotted that I could get 70mmx70mm square section pine at B&Q at a pretty good price, so I ran up a few test pieces, as much as a way to test the density of the material as anything. I'd already figured that pine was likely to be a little soft for Kubb, and would mark too easily. I cut the lengths up on my old mitre saw and rounded the edges with a 6mm radius round-over router bit. I had made a make-shift router table from a wide plank with a hole cut in it, all balanced on a Black and Decker Workmate. Worked fine.
First attempt - pine
That seemed to work pretty well, and I managed to create a set of Kubbs that looked the part, were pretty much Championship size and weight, and all without breaking the bank. My dad is pretty handy in the workshop, so I asked him to turn some batons on his lathe. The results were really good, but it's not a process that would make sense for bulk. I figured that I'd have to find a source of ready cut dowels.
We actually used that test set in a late Autumn friendly tournament and I was happy enough.
But...shaping the King without expensive tools was always going to be the main issue, so in that game we just had a big block in the middle of the pitch. Serviceable, I suppose, but not very stylish. We could do better.
The weight and size were pretty much spot on, but as predicted, they looked pretty beaten up after a day's play. Pine was probably not the answer then.
Come the winter we upped the stakes a bit and bought in enough timber to make ten full sets, with the intention of kicking off the 2016 Championship in style. We chose Poplar (aka Tulipwood) because it's slap bang in the middle of the density range that I mentioned last time, and it also happens to be the weapon of choice for the US Championship folks.
Chopping up the 30cm kings
I got all my materials from Shaun at G&S Specialist Timber in Carlisle, initially because they can offer dowels in pretty much any species of wood, at any size you need. They were also able to provide the square section material I'd need for the rest of the set. They were brilliant: manufactured and delivered in just a couple of days, great quality stuff. I can't recommend them enough.
I had come to the conclusion that the 6mm round-over bit that I has used on the test set produced edges that were a little....curvy for my tastes. So I invested in a 3mm bit for my 'Router Plank' (trademark pending) which was big enough to take the very square edges off the kubbs and give a slighter softer look, but still left plenty of grip for the drillers.
3mm radius rounding-over for better grip when drilling - possibly
The only other change I made was to procure an eighty-tooth blade for my trusty (rusty?) mitre saw to replace the thirty-tooth version that I had used before. This gives a much finer cut and is far less liable to 'tear-out'. I really wanted to protect all that lovely wood that we had splashed out on.
So, I cut the baton lengths down to 30cm and rounded over the ends with the 6mm bit, and then set about the hundred kubbs that I would need. Twelve edges per kubb means one thousand two hundred router runs to do, which I managed over two weekends.
So....I now have sixty batons and one hundred kubbs, all in beautiful Poplar. Very happy overall. Next step will be oiling them with simple old Danish oil, and working out a way to brand them with our logo. I'll come back to that.
Now...what about those pesky Kings? Next time, I guess.
We are delighted to confirm the date of the 2016 UK Kubb Championship.
We'll be gathering once again at the New Inn in Farmborough on Saturday 9th July 2016.
The pub has been incredibly supportive of our event over the last few years and we are very please that this continues into 2016.
More details later, but save the day! And in the meantime, why not register your team?